Sniper Diecast 340 Lph In-Tank Retrofit Fuel Module W/Return

340 Lph Drop-In Retrofit Efi Fuel System-E85 Compatible Supports Up To 700 Efi Or 900 Carb Hp (Hp Rating @ 60 Psi At 13.5 Volts / 10.4 Amp Draw)

Holley/Msd Is Pleased To Announce The Release Of Sniper Diecast Retrofit Fuel Pump Modules, Which Support Up To 700 Efi Horsepower Or 900 Carbureted Horsepower And Make It Easy To Affordably Upgrade To Efi. Available In Return And Returnless Versions, They Convert Your Factory Tank Or Fuel Cell To An In-Tank Efi Fuel System. They'Re Easy To Install With Basic Hand Tools And Require No Welding Or Fabrication Whatsoever. Sniper Diecast Retrofit Fuel Pump Modules Include A Diecast Pump-Hanger Bracket To Control Pump Vibration In A Low-Profile Design That'S Perfect Wherever Space Is At A Premium. They Fit Any Fuel-Tank Depth From 7 To 12 Inches And Protrude Only 1.275-Inch Above The Tank-Mounting Surface To Accommodate Numerous Applications. You Can Locate The 5 Inch Diameter Module Beside Your Existing Sending Unit Anywhere In The Tank And Rotate It A Full 360 Degrees To Work Flawlessly With Various Plumbing And Wiring Configurations. Once The Module Is Installed, All You Need To Do Is Connect Your Power-Source/Ground And Fuel Lines. Supports Up To 700 Efi Or 900 Carb Hp (@ 60 Psi At 13.5 Volts / 16.9 Amp Draw) Of Course There Are Many Variables, Estimates Are Based On Gasoline. Individual Systems Will Vary Based On Fuel System Design, Regulator Type, Fuel Cell Location, Etc...